Working closely with Eidesvik Offshore and their partner Subsea 7, Ulstein has signed a contract for delivering an offshore IMR/ construction vessel of the Ulstein SX148 design to Eidesvik Offshore.
The yard and design department at Ulstein have worked on this project for more than two years.
*
The ship is of the SX148 design from Ulstein, which can carry out highly advanced subsea work like inspection, maintenance and repair of oil installations on the sea bottom. Furthermore, the vessel can be used for clearing oil and gas wells and for well stimulation.
*
The moon pool is located centrally in the ship’s hangar, in an efficient layout providing a good and safe indoor work area on the main deck. The vessel is equipped with three ROVs: one for observation and two for operation. It also has an MHS (Module Handling System).
*
Also onboard is a 100-tonne AHC (Active Heave Compensated) offshore crane. It will be used mainly for lifting/lowering heavy equipment from/to the sea bottom. The vessel has a high freeboard – which means the work deck is high above the waterline, providing added safety for the deck crew.
*
The vessel is able to carry out demanding operations also under harsh weather conditions. The X-BOW® hull line design reduces hull motion from high waves, making it easier to keep on operating.
*
Statoil’s operational demands require that the vessel has a good back-up system for much of the equipment and systems onboard. The vessel is also ice-reinforced for arctic conditions.
*
The vessel will be 349.5 ft long and 80.4 ft wide with a top speed of over 17 knots. It will be accommodating a crew of 90. The ship will be in service for operator Statoil on her completion at the end of 2012.
Here’s some more on this from, none other than, gCaptain’s News Page. You guys should maybe, cough cough, check it sometimes. I’m not frantically updating it for my health.
ULSTEIN has signed a contract for delivering an offshore IMR/ construction vessel of the ULSTEIN SX148 design to Eidesvik Offshore. Working closely with Eidesvik Offshore and their partner Subsea 7, ULSTEIN won the contract against stiff competition from several other players.
“We are very happy that Eidesvik has again chosen ULSTEIN to provide state-of-the-art tonnage. This will be an ultra-modern IMR/construction vessel for the North Sea, which we hope will greatly benefit Subsea 7 and their customer Statoil”, says Ulstein Group’s CEO Gunvor Ulstein.
CEO of Eidesvik Offshore ASA, Jan Fredrik Meling, is very satisfied with the quality on former deliveries from ULSTEIN. “Based on experience we know that ULSTEIN is quality-conscious and has innovative employees that work hard to deliver on agreed terms and conditions. We are therefore extremely satisfied to be signing this contract with ULSTEIN”, Meling says.
The yard and design department at ULSTEIN have worked on this project for more than two years. Sales manager Håvard Stave at Ulstein Verft is happy that ULSTEIN was chosen: “Together with Subsea 7 and Eidesvik, ULSTEIN has developed a highly sophisticated offshore vessel. We have competed with the best players in the class, including contractors, shipowners, designers and yards. We are extremely proud. To us, this is truly an important contract”, says Stave, satisfied.
The ship is of the SX148 design from ULSTEIN, which can carry out highly advanced subsea work like inspection, maintenance and repair of oil installations on the sea bottom. Furthermore, the vessel can be used for clearing oil and gas wells and for well stimulation.
The moon pool is located centrally in the ship’s hangar, in an efficient layout providing a good and safe indoor work area on the main deck. The vessel is equipped with three ROVs: one for observation and two for operation. It also has an MHS (Module Handling System).
Also onboard is a 100-tonne AHC (Active Heave Compensated) offshore crane. It will be used mainly for lifting/lowering heavy equipment from/to the sea bottom. The vessel has a high freeboard – which means the work deck is high above the waterline, providing added safety for the deck crew.
The vessel is able to carry out demanding operations also under harsh weather conditions. The X-BOW® hull line design reduces hull motion from high waves, making it easier to keep on operating.
Statoil’s stringent operational demands require that the vessel has a good back-up system for much of the equipment and systems onboard. The vessel is also ice-reinforced for arctic conditions.
The vessel will be 106.5 metres long and 24.5 metres wide with a top speed of over 17 knots. It will be accommodating a crew of 90. The ship will be in service for operator Statoil on her completion at the end of 2012.
Link: http://gcaptain.com/ulstein-lands-contract-eidesvik?21636