Super heater blowout

[QUOTE=Fraqrat;97963]They called my dads outfit in to repair it all. I think the incident bankrupted the other fella. He had hired me months before to go with a few guys to Orange Texas and fire up the plant on an old ship called the Pioneer Crusader. We stayed over there in a hotel for a week I did night watch with an TMA 2nd. The automation was iffy so I just sat down below watching the fires and adjusting fuel and air by hand. The 2nd kept an eye on water levels and we collected our check. To this day I have no idea why we started everything up. At the end of the week we secured everything and that was that. Easiest money I ever made.[/QUOTE]

I surveyed the CRUSADER many years ago. . . She wasn’t painted gray back then . .

[QUOTE=tengineer;98135]I think the appreciation for “kick ass” QMEDs, oilers etc has gone out the window. It is sad because I have more respect for some of the life long oilers I knew than many of the licensed guys. These guys took pride in their work and carried many an engineer on their backs. Now there seems to be an attitude that if you don’t get a license you are some sort of lower class citizen
Heck, the drillship people don’t even know what a QMED or oiler is, they call them “motormen”. What the hell is a motorman? Who came up with that? The USCG got a “motorman” credential they’re handing out nowadays? Next thing you know engineers on drillships will be called mechanics…Transocean is already doing that in some cases.[/QUOTE]

Yeah, “Motorman” is a drilling industry designation, like roustabout, tool pusher, company man, driller, etc. . . .

[QUOTE=highseasmechanic;98129]I never really had an appreciation for steam out of the academy until I sailed on a steam. Yes I am one of the few newer guys that actually has steam ship experience. In fact I was even able to upgrade to steam 2nd due to my time. I sailed on the SS Blue Ridge for almost two years. Granted it was rather automated (single person watch stander). Regardless, I knew very little when I came on board for the first time as I only had simulator time from Cal. The Chief and First were really good about bringing me up to speed and was cleaning burners, putting in the jacking gear, and warming up the turbines in no time. The poor port boiler had many super heater tube ruptures. Got to love foster-wheeler supe rheater header inner and outer doors. We had some kick ass QMED’s who knew the drill with the doors. I think all told in the two years I sailed on her, (scrapped RIP), we plugged about 20 tubes. Rumor was they got some bad steel tubes when they were replaced in the previous shipyard.[/QUOTE]

Man, I am showing my age. I didn’t sail on a diesel powered vessel until I started with Crowley on their tugs in Lake Charles. My experience on steam ships sure came in handy when I came ashore and started with ABS.

[QUOTE=Sweat-n-Grease;98167]I don’t know what causes such an arrogant attitude on the part of some cadets and new mates and engineers. Oh yea, I heard all the theories, the most common being that’s what the academies teach cadets now days. I have my doubts it’s the schools, my theory is it’s poor potty training, and how one was raised, which produces such attitudes. I suppose it was no different a half century ago when I was a cadet but I recall I was eager to learn and appreciated all the help given. I’m sure there were many like me. Wen I was a kid my Dad, whom I loved very much, insisted I work for what I thought I wanted, if I did, he told me, he would contribute enough money to make the difference. It’s amazing how much money a kid could save by delivering new papers back in those years. Granted, times have changed but I ran into cadets who really wanted to learn and who contributed their share of the work load.[/QUOTE]

Further to my comment about starting on tugs, I was a bit like that when I made my first trip to Puerto Rico on a Crowley tug. It wasn’t even an Invader class, but the APACHE, an old high bow boat with two 8 cylinder EMDs. I figured that it would be a piece of cake since my last vessel was an SL-7. Man, did I get a bunch of humble pie to eat in just a few days. It didn’t taste very good, either. Later, I certainly learned to respect the work and even enjoy it. Talk about engineering without a net. . .

This would have been late 92ish.

[QUOTE=Fraqrat;98387]This would have been late 92ish.[/QUOTE]

Probably before that, but I can’t immediately recall. I was with ABS from 88 to late 97. Which company did (does) your dad have? We may have met. . .

He co-owned Superb Marine and Industrial Services in Theodore Alabama. They started in 92 and him and his partner sold out and semiretired a couple years ago. Prior to that they all worked for Norconsult also in the Theodore that outfit was owned by a Norwegian named Ollie something. That guy neglected to pay taxes for a couple a years and bailed out of the country with some big checks from OMI. Left in the middle of a big job on the Cove Trader. Months worth of steel work they practically rebuilt half the ship at the Cove Dock. Half the guys went and started some joint called Worldwide up in Chickasaw and my dad and his partner started their company. They did most of their work at Atlantic Marine and Chevron in Pascagoula. They branched off into the plants and refineries early 2000’s to keep busy when shipyards were slow. They travelled as needed I remember they did big cargo heater jobs on Seabulk Magnachem and Dynachem up in Charleston that kept them busy for half a year.

[QUOTE=Fraqrat;98415]He co-owned Superb Marine and Industrial Services in Theodore Alabama. They started in 92 and him and his partner sold out and semiretired a couple years ago. Prior to that they all worked for Norconsult also in the Theodore that outfit was owned by a Norwegian named Ollie something. That guy neglected to pay taxes for a couple a years and bailed out of the country with some big checks from OMI. Left in the middle of a big job on the Cove Trader. Months worth of steel work they practically rebuilt half the ship at the Cove Dock. Half the guys went and started some joint called Worldwide up in Chickasaw and my dad and his partner started their company. They did most of their work at Atlantic Marine and Chevron in Pascagoula. They branched off into the plants and refineries early 2000’s to keep busy when shipyards were slow. They travelled as needed I remember they did big cargo heater jobs on Seabulk Magnachem and Dynachem up in Charleston that kept them busy for half a year.[/QUOTE]

You wouldn’t happen to have an uncle that did some NASCAR racing, do you?

Nah not unless you count drunk drivin on the back roads coming home from the bar.

[QUOTE=Fraqrat;98440]Nah not unless you count drunk drivin on the back roads coming home from the bar.[/QUOTE]

I suppose no uncle, that you know of, delivered moon shine either.

[QUOTE=Fraqrat;98440]Nah not unless you count drunk drivin on the back roads coming home from the bar.[/QUOTE]

No relations to Delma Cowart (who also fits the above description)?

I did a seconds short trip up to Anchorage on the Consumer. Made a ton of dough on my night card for 18 days in July 08

[QUOTE=Too bad steam is gone;98452]I did a seconds short trip up to Anchorage on the Consumer. Made a ton of dough on my night card for 18 days in July 08[/QUOTE]

Neat ~
Shoot, if you were needed that badly to fill the position the Hall should have cleared you to the ship without worrying about any card ~ well for 18 days why quibble, someone might have bitched.

The Consumer’s chief was known as “The Great White Shark”. His hair was white and he is my age (mine has 1-2 grays even today). The guy was a great chief and we got along well and many mutual sailing buddies. The chief was called the GWS because he would take a bite out of your ass if you were incompetent and his white hair.

That side of the family was from north Georgia and SE Tennessee where the moon comes over the mountains in gallon jugs.

No sorry don’t know any Cowart’s.

They had a boiler repair business and I recall doing a job with them in my ABS days. I believe they were from Alabama, too.

My dad probably knows them. He knows everyone in the business all along the redneck riviera. I’ll ask him when he gets home he’s down at Keppel in Brownsville working on a rig or drillship for the next couple of weeks.