# 22-25 hp gasser needed **URL:** \ **Category:** For Sale & Wanted\ **Created:** [November 26, 2020, 4:20pm UTC](https://forum.gcaptain.com/t/22-25-hp-gasser-needed/57566 "2020-11-26T16:20:14Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![jimrr](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.gcaptain.com/jimrr/32/38358_2.png) [@jimrr](https://forum.gcaptain.com/u/jimrr)\ **Post date:** [November 26, 2020, 4:20pm UTC](https://forum.gcaptain.com/t/22-25-hp-gasser-needed/57566/1 "2020-11-26T16:20:14Z")
I’ve been beating a old Wisconson 4hv on my sawmill since i owned it. Woodmiser evidently had a italian diesel on this unit when new but none of them lasted long. Anyway, there was a day everything ran on wisconsons, (haybaler anyone?) but this thing weighs well over 300 lbs. I recently changed the points, (4 SCREWS!) and I think the valves are puking/sticking and oil treats are quitting so i’m looking for a newer 25 hp. gas that weighs like a hundred lbs. If you got one, or a lead on one that may need some repair I’d be interested. I live in NE Oregon and would make a 200 mile round trip in a day and 400 rt in two days for the right price. no briggs plz!!!, ---
**Author:** ![Hogsnort](https://avatars.discourse-cdn.com/v4/letter/h/ba8739/32.png) [@Hogsnort](https://forum.gcaptain.com/u/Hogsnort)\ **Post date:** [November 26, 2020, 6:15pm UTC](https://forum.gcaptain.com/t/22-25-hp-gasser-needed/57566/2 "2020-11-26T18:15:43Z")
You might look at a Robin EH65D , air cooled ,4- stroke engine. Continuous output 12.7 kW, max torque 45.6Nm. Weight 44kg. Honda makes a similar engine. ---
**Author:** ![jimrr](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.gcaptain.com/jimrr/32/38358_2.png) [@jimrr](https://forum.gcaptain.com/u/jimrr)\ **Post date:** [November 26, 2020, 8:28pm UTC](https://forum.gcaptain.com/t/22-25-hp-gasser-needed/57566/3 "2020-11-26T20:28:00Z")
thx, will do. ---
**Author:** ![jimrr](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.gcaptain.com/jimrr/32/38358_2.png) [@jimrr](https://forum.gcaptain.com/u/jimrr)\ **Post date:** [November 26, 2020, 8:32pm UTC](https://forum.gcaptain.com/t/22-25-hp-gasser-needed/57566/4 "2020-11-26T20:32:38Z")
subaru, prob a pretty good unit and the price is very affordable for new. i wouldn’t have a issue with it at 35 lb. torque but a straight shaft? no keyway? wtf? ---
**Author:** ![RC.Joe](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.gcaptain.com/rc.joe/32/7346_2.png) [@RC.Joe](https://forum.gcaptain.com/u/RC.Joe)\ **Post date:** [November 27, 2020, 11:21pm UTC](https://forum.gcaptain.com/t/22-25-hp-gasser-needed/57566/5 "2020-11-27T23:21:42Z")
You may shop around on some of the old Tractor and Equipment forums and find a Red Seal Continental engine in those dimensions. They were used a lot on mills here in Appalachia. A lot of lumber was cut using them and the operators I’ve bought lumber from in the past spoke well of them. Oldie’s but goodies. ---
**Author:** ![jimrr](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.gcaptain.com/jimrr/32/38358_2.png) [@jimrr](https://forum.gcaptain.com/u/jimrr)\ **Post date:** [November 28, 2020, 3:49pm UTC](https://forum.gcaptain.com/t/22-25-hp-gasser-needed/57566/6 "2020-11-28T15:49:03Z")
continental a good power unit. i think i’m running two here on the ranch … fork lift and tractor. i have a diesel but thinking of saving it for a planer or resaw or something … water pump? … there is also the lurking thot of resale value on the mill but with the price of lumber i’m seriously thinking i’d be better off keeping it because i sure can not bear paying the going price for a board at the store!!! ---
**Author:** ![SeaEagle](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.gcaptain.com/seaeagle/32/17788_2.png) [@SeaEagle](https://forum.gcaptain.com/u/SeaEagle)\ **Post date:** [November 28, 2020, 5:35pm UTC](https://forum.gcaptain.com/t/22-25-hp-gasser-needed/57566/7 "2020-11-28T17:35:08Z")
Yes, lumber prices are off the frigging chart. Just replaced a few 4x4 posts for my fence. $17 each.